Elkay ECTSRAD33226TBG2 Dual Mount Ada Kitchen Sink Kit

Product Description

The ELKAY ECTSRAD33226TBG2 is an 18-gauge stainless steel dual mount kitchen sink kit designed for ADA-compliant installations. It features two equal-sized bowls, each measuring 14.75 inches in length, 16.75 inches in width, and 6 inches deep, with rear center drain openings sized for 3.5-inch drains. The sink ships as a complete kit including bottom grids and mounting hardware. It is installed by licensed plumbers or experienced kitchen contractors in residential and light commercial applications. Sound-deadening spray pads on the sides and bottom reduce operational noise during use.

This sink kit is suited for residential kitchens requiring ADA compliance when properly installed. The dual mount design supports both drop-in and undermount configurations, giving installers flexibility based on countertop type and project requirements. The slim rim profile integrates cleanly into the countertop surface in either orientation. A minimum cabinet width of 36 inches is required. The countertop cutout dimensions are 32-3/8 inches by 21-3/8 inches with a 1/2-inch corner radius. Installation hardware is included for countertops up to 1-1/2 inches thick. The included CTXBG1315 bottom grids keep dishes elevated while allowing water to drain freely.

Key Features

• 18-gauge stainless steel construction for corrosion resistance and long-term durability
• Dual mount design supports drop-in or undermount installation
• Two equal bowls, each 14.75 inches by 16.75 inches by 6 inches deep
• ADA compliant when installed per manufacturer guidelines
• Full sound-deadening spray pads on sides and bottom reduce noise
• U-channel mounting system simplifies installation and reduces under-sink access time
• Includes CTXBG1315 bottom grids and hardware for countertops up to 1-1/2 inches thick

Compatibility

Designed for installation in kitchen countertop applications requiring a 36-inch minimum cabinet width. Countertop cutout dimensions of 32-3/8 inches by 21-3/8 inches with a 1/2-inch corner radius are required. Compatible with standard 3.5-inch drain fittings. Suitable for drop-in or undermount configurations in countertops up to 1-1/2 inches thick.

Installation Notes

Installation should be performed by a licensed plumber or qualified contractor in accordance with applicable local plumbing codes. Shut off the water supply and disconnect any existing drain connections before beginning work. For undermount applications, confirm that the countertop material and substrate can support the weight of the sink and provide adequate adhesive bonding surface. Verify ADA mounting height requirements with local code authority prior to rough-in.