Electro Hardware 1467M06F16-632 Hex Standoff 6-32

Product Description

The ELECTRO HARDWARE 1467M06F16-632 is an aluminum male-female hex circuit board standoff designed to create fixed spacing between PCBs, panels, and chassis in electronic assemblies. It features a 6-32 unified thread on both the male and female ends, with an overall length of 1.75 inches and a hex body width across flats of 0.25 inches. The anodized finish provides corrosion resistance and surface hardness suited for rack-mount enclosures, control panels, and instrumentation housings. Made from T-3 aluminum to QQ-A-225A Comp 2 specification, this standoff is a standard hardware item used by electrical and electronics technicians in light commercial and industrial panel builds.

This standoff fits applications where rigid board-to-board or board-to-chassis separation is required. The male-female configuration allows multiple standoffs to be stacked or used in sequence to mount circuit boards at a fixed offset. Typical installations include control board assemblies, industrial enclosures, HVAC control panels, and low-voltage electronics housings. The 6-32 thread size is one of the most common thread standards in North American PCB hardware, making this standoff broadly applicable across a range of panel and rack assemblies.

Key Features

• Male-female hex body allows stacking and sequential mounting configurations
• 6-32 unified thread on both ends for broad hardware compatibility
• Overall length of 1.75 inches with a 1.5-inch hex body and 0.25-inch thread length
• T-3 aluminum construction with anodized finish for corrosion resistance and durability
• Meets QQ-A-225A Comp 2 fastener standard
• Length tolerance of -0.005 to 0.005 inches for consistent, precise board spacing

Compatibility

Designed as a standard 6-32 male-female hex standoff for use in PCB mounting, control panel assembly, and electronic enclosure builds where 1.75-inch board spacing is required.

Installation Notes

Installation is performed by hand or with a hex wrench sized to the 0.25-inch width across flats. De-energize all circuits and discharge any stored capacitance before working inside control panels or enclosures. Use appropriately rated thread-locking methods only if specified by the enclosure or board manufacturer. Follow applicable NEC requirements when installing standoffs inside listed electrical enclosures.