Eclipse MM5/1.0/MSC Magnetic Filtration Unit 5 in Npt

Product Description

The ECLIPSE MM5/1.0/MSC is a 5-inch magnetic filtration unit designed to capture ferrous particles and metallic debris from fluid systems before they cause wear or damage to pumps, valves, and downstream components. The unit features a 1.0-inch NPT port and outlet, making it compatible with standard 1-inch pipe fittings commonly found in industrial and commercial hydronic, cooling, and process fluid systems. At 5.5 pounds, it is a compact, inline installation. This type of filtration unit is typically installed by licensed pipefitters, mechanical contractors, or HVAC technicians during system commissioning or as part of a preventive maintenance upgrade.

This magnetic filtration unit is suited for closed-loop and open-loop fluid systems where ferrous contamination is a concern, including hydronic heating and cooling circuits, chilled water systems, and light industrial process lines. It is rated for a maximum flow rate of 70 liters per minute and is designed to operate within a fluid temperature range of 41 degrees F to 122 degrees F. The 1.0-inch NPT connections allow straightforward integration into existing pipework without specialized adapters in most standard installations.

Key Features

• 5-inch magnetic filtration unit captures ferrous debris inline to protect downstream equipment
• 1.0-inch NPT port and outlet for compatibility with standard 1-inch pipe systems
• Maximum flow rate of 70 liters per minute suitable for commercial and light industrial applications
• Operating temperature range of 41 degrees F to 122 degrees F for hydronic and process fluid use
• Compact form factor at 5.5 pounds for straightforward inline installation

Compatibility

Designed as an inline replacement or new-installation magnetic filtration unit for fluid systems using 1.0-inch NPT piping connections, including hydronic heating and cooling loops and compatible process fluid circuits.

Installation Notes

Installation should be performed by a licensed pipefitter or qualified mechanical contractor in accordance with applicable local plumbing and mechanical codes. Isolate and depressurize the system and shut off fluid flow completely before cutting into the line or removing any existing filtration components. Use appropriate pipe thread sealant rated for the fluid type and temperature range of the system. Verify flow direction markings on the unit body before finalizing connections, as reverse installation will reduce filtration effectiveness.