Eaton 3270-0615-0500 Polyamide Tube 0.25 in Id 1400 Psi

Product Description

The EATON 3270-0615-0500 is a green polyamide tubing supplied in a 500-foot standard coil cut to length. It features a 0.251-inch inside diameter and a 0.375-inch outside diameter with a 0.062-inch wall thickness. The tube is rated to a maximum working pressure of 1,400 psi, making it suitable for pneumatic and fluid transfer lines in demanding industrial and commercial environments. Plumbers, HVAC technicians, and industrial maintenance professionals install this tubing where lightweight, high-pressure-rated plastic line is required in place of metal or rubber alternatives.

This polyamide tube is used in compressed air systems, instrumentation lines, and fluid control circuits across light industrial, commercial HVAC, and process control applications. Its cut-to-length format allows installers to pull exactly the footage needed from the 500-foot coil, minimizing waste on multi-run installations. The green color coding assists with line identification in multi-circuit installations where color differentiation matters.

Key Features

• Maximum working pressure of 1,400 psi for high-demand pneumatic and fluid lines
• 0.251-inch inside diameter and 0.375-inch outside diameter with a 0.062-inch wall thickness
• Polyamide construction resists moisture, oils, and moderate chemicals
• Green color coding for easy line identification in multi-circuit installations
• 500-foot standard coil supplied cut to length for flexible job-site use

Compatibility

Designed as a general-purpose cut-to-length polyamide tube for use with standard push-to-connect and compression fittings sized for 3/8-inch OD tubing in pneumatic and fluid transfer systems.

Installation Notes

Installation is typically performed by licensed plumbers, HVAC technicians, or industrial pipefitters. Ensure all system pressure is fully relieved and the circuit is de-energized before cutting or connecting tubing. Use a clean, square tube cut to ensure proper seating in push-to-connect or compression fittings and to maintain the rated working pressure. Verify that all fitting ratings meet or exceed the 1,400 psi working pressure of this tubing before commissioning the line.