Eagle Cutting Tool VM4350-008-3-D Masonry Drill Bit

Product Description

The EAGLE CUTTING TOOL VM4350-008-3-D is a carbide-tipped masonry drill bit designed for boring through concrete, brick, block, and other masonry substrates. With a 0.125-inch diameter and a 3-inch overall length, this bit fits standard rotary and hammer drills used in everyday masonry work. The carbide tip delivers the hardness needed to penetrate abrasive materials without rapid wear. Licensed tradespeople and experienced DIYers working on anchoring, fastening, or conduit-entry tasks in masonry will find this a dependable single-bit solution for small-diameter holes.

This bit is suited for light-duty masonry drilling applications in both residential and light commercial settings. Typical uses include drilling pilot holes for anchor bolts, wall anchors, or electrical box installations in concrete block, brick veneer, or poured concrete. The 0.125-inch diameter is a common size for smaller anchors and toggle-style fasteners used by electricians, plumbers, and general contractors when securing equipment or conduit to masonry surfaces.

Key Features

• Carbide tip construction for hardness and wear resistance in abrasive masonry materials
• 0.125-inch (1/8-inch) cutting diameter for small-anchor and pilot-hole applications
• 3-inch overall length provides adequate reach for standard wall and block drilling
• Compatible with standard rotary drills and hammer drills accepting round or hex shanks of this diameter
• Manufactured in the USA

Compatibility

Designed as an OEM-style masonry drill bit suitable for use in standard rotary or hammer drills accepting a 0.125-inch shank, commonly used for small-diameter masonry boring in residential and light commercial construction.

Installation Notes

Masonry drilling is typically performed by electricians, plumbers, or general contractors as part of fastening or rough-in work. Always wear appropriate eye and respiratory protection when drilling into concrete or masonry due to dust and debris. Use the drill at the correct speed setting for masonry, and allow the bit to clear material gradually to reduce heat buildup and tip wear. Confirm the drill chuck size is compatible with the 0.125-inch shank before use.

Technical Specifications

• Cutting Diameter: 0.125 inches
• Overall Length (OAL): 3 inches
• Tip Type: Carbide Tip
• Country of Origin: USA
• Weight: 0.08 pounds
• Minimum Order Quantity: 1

Standard Information

• Brand: EAGLE CUTTING TOOL
• Manufacturer Part Number: VM4350-008-3-D