Eagle Cutting Tool SDS4350-5625-10-D Sds Masonry Drill

Product Description

The EAGLE CUTTING TOOL SDS4350-5625-10-D is an SDS-shank masonry drill bit engineered for rotary hammer drilling into concrete, brick, block, and similar masonry substrates. It features a 9/16 inch cutting diameter and a 10-1/8 inch overall length (OAL), making it well-suited for through-hole and deep anchor-setting applications. The Delta tip geometry is designed to improve penetration rate and extend service life in abrasive materials. This bit is a standard tool for electricians, plumbers, HVAC installers, and general contractors who core through masonry walls and slabs during rough-in work.

This bit is sized for common sleeve-anchor and through-bolt applications in residential and commercial construction. The 9/16 inch diameter matches standard anchor hardware widely used for equipment mounting, pipe hangers, conduit supports, and structural attachments. The 10-1/8 inch OAL provides enough reach for typical CMU block walls and thicker concrete slabs without requiring an extension. It is installed in any SDS-plus rotary hammer that accepts standard SDS-plus shanks.

Key Features

• 9/16 inch cutting diameter for standard anchor and through-bolt sizing
• 10-1/8 inch overall length for deep penetration in block and concrete
• Delta tip geometry for improved cutting efficiency in hard masonry
• SDS-plus shank for secure, tool-free bit changes in SDS-plus rotary hammers
• Weighs 0.47 pounds for easy single-handed bit swaps on the job

Compatibility

Designed for use with SDS-plus rotary hammers accepting standard SDS-plus shank tooling. Suitable for drilling into concrete, brick, block, and similar masonry materials.

Installation Notes

Installation is performed by electricians, plumbers, HVAC mechanics, and general trade contractors using an SDS-plus rotary hammer. Ensure the hammer is set to the correct mode (rotary hammer, not chisel-only) before drilling. Wear appropriate PPE including eye protection and a dust mask or respirator when drilling masonry, as silica-containing dust is a respiratory hazard. Follow applicable OSHA silica exposure guidelines and local safety codes when performing masonry drilling operations.

Technical Specifications

• Cutting Diameter: 9/16 inch
• Overall Length (OAL): 10-1/8 inches
• Shank Type: SDS-plus
• Tip Style: Delta
• Application: Masonry (concrete, brick, block)
• Weight: 0.47 pounds

Standard Information

• Brand: EAGLE CUTTING TOOL
• Manufacturer Part Number: SDS4350-5625-10-D