Eagle Cutting Tool SDS4350-2500-6-D Sds Masonry Drill Bit

Product Description

The EAGLE CUTTING TOOL SDS4350-2500-6-D is an SDS-shank masonry drill bit designed for rotary hammer drilling into concrete, block, brick, and other masonry substrates. It measures 0.25 inches in diameter with an overall length of 6.625 inches, giving it the reach needed for anchor bolt holes, conduit pass-throughs, and structural penetrations. The delta-style tip geometry is engineered to cut efficiently through hard masonry while the SDS shank locks securely into compatible rotary hammer chucks. This bit is a standard tool for electricians, plumbers, HVAC installers, and general contractors working on masonry structures.

This bit suits residential and light commercial applications where a 0.25-inch hole is required in concrete, CMU block, or brick. Typical uses include setting sleeve anchors, running low-voltage wiring through masonry walls, and drilling pilot holes for pipe hangers or strut channels. The 6.625-inch overall length provides sufficient depth capacity for most standard wall penetrations without requiring an extension.

Key Features

• SDS shank for secure, tool-free chuck engagement on SDS rotary hammers
• Delta-style carbide tip geometry for aggressive masonry cutting
• 0.25-inch diameter suits anchor and pass-through applications
• 6.625-inch overall length provides extended reach in masonry walls
• Minimum order quantity of 1 for flexible purchasing

Compatibility

Designed for use with SDS-chuck rotary hammers for drilling into concrete, brick, block, and similar masonry materials.

Installation Notes

This bit is installed and used by electricians, plumbers, HVAC technicians, and contractors performing masonry drilling with an SDS rotary hammer. Wear appropriate eye protection and a dust mask or respirator when drilling into masonry, as silica dust is a respiratory hazard. Ensure the rotary hammer is powered off and the bit is fully seated and locked in the chuck before beginning work. Do not use this bit in a standard drill chuck — SDS shanks require a dedicated SDS or SDS-plus rotary hammer.

Technical Specifications

• Shank Type: SDS
• Tip Style: Delta
• Diameter: 0.25 inches
• Overall Length (OAL): 6.625 inches
• Weight: 0.25 pounds
• Application: Masonry

Standard Information

• Brand: EAGLE CUTTING TOOL
• Manufacturer Part Number: SDS4350-2500-6-D