Eagle Cutting Tool 1080D-038-D Self-feed Drill Bit 19/32 in

Product Description

The EAGLE CUTTING TOOL 1080D-038-D is a 19/32-inch self-feed drill bit designed for boring clean, fast holes through wood framing, engineered lumber, and similar materials. Built on a 1/2-inch shank, this bit seats securely in standard 1/2-inch chuck drills and right-angle drills commonly used in rough-in work. The self-feed point pulls the bit through material without requiring constant forward pressure, reducing operator fatigue during repetitive boring. At 0.69 pounds, it is a solid, full-size cutting tool suited for production framing and mechanical rough-in applications.

This bit is well-suited for residential and light commercial construction tasks where plumbers, electricians, and HVAC installers need to bore through wood studs, plates, and joists to route pipe, conduit, or ductwork. The 19/32-inch diameter accommodates smaller conduit runs and certain pipe pass-throughs. The 1/2-inch shank requires a 1/2-inch chuck drill or right-angle drill, which is standard equipment for most trade rough-in work. Manufactured in the USA.

Key Features

• 19/32-inch cutting diameter for precision bore sizing in framing lumber
• Self-feed point design pulls through material with reduced operator pressure
• 1/2-inch shank for compatibility with standard 1/2-inch chuck drills and right-angle drills
• USA manufactured construction
• Lightweight at 0.69 pounds for extended overhead or confined-space use

Compatibility

Designed for use with any drill accepting a 1/2-inch round shank bit, including standard corded and cordless drill drivers and right-angle drills commonly used in plumbing, electrical, and HVAC rough-in applications.

Installation Notes

This bit is installed and operated by licensed tradespeople including electricians, plumbers, and HVAC technicians during rough-in phases. Ensure the bit shank is fully seated and the chuck is tightened securely before operation. Always de-energize electrical circuits and confirm no live wires, pipes, or structural members are present in the bore path before drilling. Follow applicable local building codes and OSHA guidelines for drilling operations in occupied or energized structures.

Technical Specifications

• Cutting Diameter: 19/32 inches
• Shank Size: 1/2 inches
• Bit Type: Self-Feed
• Weight: 0.69 pounds
• Country of Origin: USA

Standard Information

• Brand: EAGLE CUTTING TOOL
• Manufacturer Part Number: 1080D-038-D