E-z Lok DV-132-TH Brass Threaded Insert 10-32 Unf

Product Description

The E-Z LOK DV-132-TH is a double vane tapered hole threaded insert manufactured from brass, designed to install a durable 10-32 UNF internal thread into plastic host materials. The tapered hole design accepts a pilot diameter of 0.251 inches, with a small end hole diameter of 0.246 inches expanding to a large end hole diameter of 0.277 inches. The insert measures 0.375 inches overall length with an insert diameter of 0.297 inches. Dual vanes anchor the insert against rotation and pullout once seated, creating a reliable threaded connection in applications where the base material alone cannot sustain thread engagement. Typically installed by mechanical assemblers, maintenance technicians, and production line operators working with plastic housings or enclosures.

This insert is intended for use in plastic components requiring a permanent, load-bearing threaded hole. Typical applications include plastic enclosures, panels, housings, and structural plastic assemblies where a metal thread is needed to accept a 10-32 machine screw or fastener. The tapered hole configuration is well-suited to press-in or thermal installation methods commonly used in production and field repair environments. A minimum wall thickness of 0.159 inches is required in the host material to support proper installation and retain full thread integrity.

Key Features

• 10-32 UNF internal thread standard for broad fastener compatibility
• Double vane design resists rotation and pullout in plastic host materials
• Tapered hole geometry guides controlled seating during installation
• Brass construction provides corrosion resistance and reliable thread wear life
• Compact 0.375 inch overall length suits thin-wall plastic applications
• Requires minimum 0.159 inch host wall thickness for proper retention

Compatibility

Designed for installation into plastic host materials requiring a 10-32 UNF threaded insert. The tapered hole design is compatible with press-in and thermal installation methods standard for plastic assemblies.

Installation Notes

Installation should be performed by a qualified technician familiar with threaded insert procedures for plastic materials. The host material must be pre-drilled or molded to the correct tapered hole dimensions before insert placement. Thermal installation tools or an arbor press are typically used to seat the insert flush and square to the surface. Verify minimum wall thickness of the host part meets the 0.159 inch requirement prior to installation to prevent cracking or insert pullout.