E.r. Wagner 3F2344C27000199 Rigid Caster 375 Lb 4 in

Product Description

The E.R. WAGNER 3F2344C27000199 is a rigid top plate caster built for medium-duty industrial and commercial applications. It uses a 4-inch diameter polypropylene wheel with a 1-3/8 inch width, supported by a roller bearing for smooth, consistent rolling performance. The mounting plate measures 4.625 inches in length by 3.75 inches in width and attaches directly to equipment frames or carts via standard fasteners. The caster carries a load capacity of 375 pounds and stands 5-3/8 inches in overall height. The frame and plate feature a zinc finish over hardened, heat-treated steel construction, adding corrosion resistance in wet or wash-down environments. NSF-listed design makes it suitable for food service and sanitary facility use.

This caster is used in medium-duty settings such as commercial kitchens, food processing areas, warehouses, utility carts, and light industrial equipment. The rigid mount style means the wheel does not swivel, keeping equipment tracking in a straight line. It is well suited for the non-steering positions on four-caster assemblies, typically paired with swivel casters at one end. Facilities maintenance techs, equipment fabricators, and commercial kitchen installers are the primary trades that specify and install this type of caster.

Key Features

• 375 lb load capacity for medium-duty cart and equipment use
• 4-inch polypropylene wheel resists moisture, mild chemicals, and common cleaning agents
• Roller bearing provides smooth rolling under sustained loads
• Hardened, heat-treated steel frame with zinc finish for corrosion resistance
• NSF-listed construction suitable for food service and sanitary environments
• Rigid mount style maintains directional tracking on straight-line applications

Compatibility

Designed as an OEM-style rigid top plate caster for medium-duty carts, equipment frames, and industrial fixtures requiring a 4-inch wheel and a top plate mount measuring 3.75 inches by 4.625 inches.

Installation Notes

Installation is performed by facilities maintenance technicians or equipment fabricators using standard hand tools. Before mounting, verify that the equipment frame or cart deck is flat, structurally sound, and capable of supporting the intended combined load across all casters. Secure the plate with appropriately rated fasteners through all four mounting holes to prevent rocking or plate flex under load. Do not exceed the rated 375 lb load capacity per caster.