E.r. Wagner 2F9944B26000110 Swivel Caster 4 in 165 Lb

Product Description

The E.R. WAGNER 2F9944B26000110 is a stem-mount swivel caster designed for industrial and commercial material-handling applications. The wheel measures 4 inches in diameter and 1-1/4 inches wide, with an overall assembly height of 4-1/2 inches. The wheel is constructed from thermoplastic rubber (TPR) for floor-friendly rolling with reasonable load capacity. A Delrin bearing supports smooth swivel action under load. The caster carries a rated capacity of 165 pounds and mounts via a 1/2-13 x 1-1/2 inches threaded stem. Hardware features a zinc chromate finish for corrosion resistance in demanding shop and warehouse environments.

This caster is suited for industrial carts, commercial equipment, material-handling dollies, and fabricated rolling fixtures where a threaded stem mount is required. The TPR wheel compound is appropriate for use on concrete, tile, and sealed floors where noise reduction and surface protection matter. The swivel design allows full-directional maneuverability. At 165 lb per-caster capacity, the 2F9944B26000110 is rated for light-to-medium duty industrial and commercial service. Installation is straightforward for maintenance technicians and fabricators working with threaded-insert or tube-socket mounting arrangements.

Key Features

• 4 inches diameter TPR wheel provides quiet, floor-protective rolling
• 165 lb load capacity per caster for light-to-medium duty service
• Delrin bearing supports smooth, low-friction swivel rotation
• 1/2-13 x 1-1/2 inches threaded stem fits standard threaded mounting sockets
• Zinc chromate finish on hardware resists corrosion in industrial environments
• Hardened, heat-treated construction for extended service life

Compatibility

Designed for industrial and commercial equipment requiring a 1/2-13 threaded stem swivel caster with a 4 inches diameter wheel. Suitable for use wherever a standard threaded-stem caster mount is present.

Installation Notes

Installation is performed by threading the stem directly into a compatible 1/2-13 threaded socket or insert. Ensure the receiving socket is clean and free of debris before installation. De-energize or fully unload any equipment before replacing casters to prevent movement during service. Verify that the combined caster load rating across all mounting points meets or exceeds the total equipment weight before returning to service.