E.r. Wagner 2F9905B25000110 Swivel Caster 5in 280lb

Product Description

The E.R. WAGNER 2F9905B25000110 is a stem mount swivel caster designed for industrial and commercial material handling applications. The wheel measures 5 inches in diameter and 1-1/4 inches wide, with an overall assembled height of 5-1/2 inches. The wheel is constructed from polyurethane with rubber composition, providing durable rolling performance on hard and semi-hard floor surfaces. The swivel head uses a Delrin bearing for smooth, low-maintenance rotation. Mounting is accomplished via a 1/2-13 threaded stem at 1-1/2 inches in length. Load capacity is rated at 280 pounds. The hardware finish is zinc chromate for corrosion resistance. Maintenance crews, equipment builders, and industrial fabricators are the primary installers of this caster type.

This caster is suited for light-to-medium-duty industrial and commercial equipment, including carts, workstations, racks, and portable equipment frames. The polyurethane wheel is appropriate for warehouse floors, tile, concrete, and similar surfaces where floor protection and durability are both required. The threaded stem mount makes it compatible with standard stem socket receivers and pre-drilled leg tubing commonly found on fabricated steel equipment. A 280-pound per-caster capacity rating supports multi-caster configurations on moderate-load platforms.

Key Features

• 5 inches diameter polyurethane and rubber wheel for durable, floor-friendly rolling
• 280-pound load capacity per caster
• Delrin bearing in swivel head for smooth, low-maintenance rotation
• 1/2-13 threaded stem at 1-1/2 inches for secure equipment mounting
• Hardened, heat-treated construction for long service life under industrial loads
• Zinc chromate finish provides corrosion resistance in demanding environments

Compatibility

Designed as an OEM-style replacement or new-install swivel caster for industrial and commercial equipment using a 1/2-13 threaded stem mount configuration.

Installation Notes

Installation is performed by equipment fabricators or maintenance technicians familiar with caster and cart hardware. Before replacing a caster on mobile equipment, ensure the load is fully supported and the equipment is stable. Thread the stem fully into a compatible 1/2-13 receiver or stem socket and secure with the appropriate locking hardware to prevent loosening under dynamic loads. Verify that the combined caster load rating of all installed casters meets or exceeds the total equipment load before returning the unit to service.