E.r. Wagner 2F9903027000105 Swivel Stem Mount Caster

Product Description

The E.R. WAGNER 2F9903027000105 is a stem mount swivel caster designed for industrial and commercial material handling applications. The caster features a 3-inch diameter polyolefin wheel that is 1-1/4 inches wide, with an overall assembly height of 3-5/8 inches. A plain bearing supports smooth rolling under load, and the unit is rated for 210 pounds of capacity. The threaded stem measures 7/16-14 x 1-1/2 inches and installs directly into pre-threaded receiver sockets on equipment legs and frames. The zinc chromate finish provides corrosion resistance in light-duty wet or shop environments. Maintenance technicians, equipment assemblers, and facilities professionals install this caster on carts, benches, and light industrial equipment.

This caster is suited for industrial and commercial settings where a compact, swivel-action wheel is needed on equipment with threaded stem receivers. The polyolefin wheel material performs well on smooth concrete, tile, and sealed flooring. At 3 inches in diameter and rated to 210 pounds, this unit fits light to medium-duty carts, portable workstations, shelving units, and similar equipment. The swivel action allows full 360-degree maneuverability for easy repositioning of equipment by hand.

Key Features

• 210-pound load capacity for light to medium-duty industrial and commercial use
• Polyolefin wheel construction with hardened, heat-treated components for durability
• Plain bearing design for straightforward, low-maintenance operation
• Zinc chromate finish for corrosion resistance in shop and light-moisture environments
• 7/16-14 x 1-1/2 inch threaded stem for direct installation into compatible stem receivers
• Full swivel action for 360-degree directional mobility

Compatibility

Designed for equipment with 7/16-14 threaded stem receiver sockets. Suitable for industrial and commercial carts, benches, shelving, and portable equipment requiring a 3-inch swivel caster with a threaded stem mount.

Installation Notes

Installation is performed by threading the stem into a compatible receiver socket by hand, then tightening with an appropriate wrench. Ensure the receiving socket thread specification matches 7/16-14 before installation. Power down or lock out any motorized equipment before replacing casters. Verify that the combined load does not exceed the rated capacity of any individual caster in the set.