Dynabrade X61V 6 Inch Random Orbital Air Sander

Product Description

The DYNABRADE X61V is a 6 inch random orbital air sander designed for surface preparation, finishing, and material removal in professional trade and industrial environments. Powered by compressed air at 90 psi and consuming 19 CFM, it operates at up to 12,000 OPM (orbits per minute) with a 3/16 inch orbit diameter, delivering consistent, swirl-minimized finishes on flat and contoured surfaces. The 0.3 HP motor provides sustained output for extended use. The tool connects via a 1/4 inch NPT inlet and accepts a 6 inch round hook and loop backing pad. This sander is intended for use by automotive, industrial maintenance, and finishing trades professionals.

The X61V suits applications where a fine, controlled finish is required on large flat panels, composite surfaces, or metal substrates. The built-in vacuum port allows connection to a dust extraction system, keeping the work area clean and reducing airborne particulate exposure. The hook and loop pad system makes abrasive changes fast without tools. Typical install scenarios include body shop refinishing, metal fabrication prep, and industrial coating preparation in both shop and field environments.

Key Features

• 6 inch round hook and loop backing pad for fast, tool-free abrasive changes
• 12,000 OPM operating speed for efficient material removal and finishing
• 3/16 inch orbit diameter for swirl-minimized surface finish
• Integrated vacuum port compatible with dust extraction systems
• 1/4 inch NPT air inlet for standard shop air connections
• 0.3 HP motor at 90 psi for sustained output during extended use

Compatibility

Designed as an OEM-style pneumatic random orbital sander accepting standard 6 inch hook and loop abrasive discs with a 3/16 inch orbit pattern. Compatible with shop air systems supplying 90 psi and minimum 19 CFM at the tool inlet.

Installation Notes

Installation and operation should be performed by qualified personnel familiar with pneumatic tool safety practices. Ensure the air supply is regulated to 90 psi and the line delivers adequate CFM before connecting the 1/4 inch NPT inlet. Depressurize and disconnect the air supply before changing abrasive pads or performing any maintenance. Verify dust extraction connections are secure before operation to comply with applicable workplace air quality standards.