Dynabrade X52 Random Orbital Air Sander 5 Inch

Product Description

The DYNABRADE X52 is a pneumatic random orbital sander built for surface finishing applications in professional trade and industrial environments. Powered by compressed air at 90 psi and consuming 19 CFM, it delivers 12,000 orbits per minute through a 5-inch round adhesive/PSA backing pad. The 3/32-inch orbit diameter produces a fine, swirl-minimized finish suited to bodywork, metalwork, and composite surface preparation. At 0.3 HP and 1.74 pounds, the tool is lightweight enough for extended overhead or vertical work without excessive operator fatigue. A 1/4-inch NPT inlet connects to standard shop air supply lines.

The X52 is designed for professional use in automotive body shops, fabrication facilities, metal finishing operations, and general industrial surface prep. The 5-inch round PSA pad accepts standard adhesive-backed abrasive discs commonly used in paint prep and finishing sequences. With a minimum hose size of 0.25 inches and a 90 psi operating pressure, it is compatible with typical centralized shop air systems. Licensed body technicians, fabricators, and industrial finishing specialists are the primary installers and operators of this tool.

Key Features

• 12,000 OPM free speed for fast material removal and smooth finishing
• 5-inch round adhesive/PSA backing pad accepts standard sanding discs
• 3/32-inch orbit diameter minimizes swirl marks on finished surfaces
• 1/4-inch NPT air inlet fits standard shop air connections
• Lightweight at 1.74 pounds for reduced fatigue during extended use
• 0.3 HP pneumatic motor requires no electrical power at the point of use

Compatibility

Designed as an OEM-style pneumatic random orbital sander accepting 5-inch round adhesive/PSA abrasive discs standard to automotive and industrial finishing applications.

Installation Notes

Connect the X52 to a compressed air supply regulated to 90 psi using a minimum 0.25-inch inside-diameter air hose. Ensure the air line includes an inline filter and lubricator to protect internal components and extend service life. Before mounting or changing abrasive discs, disconnect the air supply to prevent accidental tool activation. Always verify that the backing pad and abrasive disc are securely seated before operation.