Dynabrade 59010 Palm Air Random Orbital Sander 6 Inch

Product Description

The DYNABRADE 59010 is a pneumatic palm-style random orbital sander designed for surface finishing, material removal, and preparation work across automotive, woodworking, metal fabrication, and industrial maintenance applications. The tool operates at 12,000 OPM and accepts a 6-inch round sanding pad, making it well suited for larger flat and contoured surfaces. Air consumption runs at 14 CFM with a 90 psi operating pressure and a 1/4 NPT inlet. At 1.4 pounds, the tool reduces operator fatigue during extended use. Installation and setup require only a compatible air supply and hose rated for the specified inlet size.

This sander is used in production and repair environments where consistent swirl-free finish quality is required. Its palm-grip design suits single-handed operation on horizontal and vertical work surfaces. The built-in vacuum compatibility allows connection to dust extraction equipment, keeping work areas cleaner and reducing airborne particulate. The included premium urethane weight-mated sanding pad is designed to match the orbital motion of the tool for uniform abrasive contact across the full 6-inch pad surface. Typical applications include body shop prep work, furniture finishing, composite sanding, and general surface conditioning.

Key Features

• 6-inch round pad accepts standard hook-and-loop sanding discs
• 12,000 OPM operating speed for efficient material removal and finishing
• 0.375-inch (10 mm) orbit diameter for smooth, swirl-minimized surface results
• Vacuum-ready design compatible with dust extraction systems
• Includes premium urethane weight-mated sanding pad for balanced orbital action
• Lightweight 1.4-pound tool body reduces operator fatigue in sustained use

Compatibility

Designed as a direct-use pneumatic sander requiring an air supply of 90 psi and minimum 14 CFM; accepts a 0.25-inch minimum hose with 1/4 NPT inlet fitting and standard 6-inch hook-and-loop sanding discs.

Installation Notes

Connection and setup should be performed by a qualified technician familiar with pneumatic tool systems. Shut off and bleed the air supply line before connecting or disconnecting the tool. Verify that the compressor and hose assembly meet the 90 psi and 14 CFM supply requirements before operation. Do not exceed the rated operating pressure, and ensure all fittings are properly seated and leak-free before use.