Duravent 03SRF Adjustable Steep Roof Flashing 3 in

Product Description

The DURAVENT 03SRF is an adjustable steep roof flashing designed for use with 3-inch diameter venting systems. It accommodates roof pitches from 6/12 to 12/12, making it suitable for a wide range of residential roof slopes. This flashing seals the point where a vent pipe penetrates the roof deck, preventing water intrusion while allowing for proper venting. Licensed HVAC technicians and plumbers install this component as part of vented appliance exhaust systems, including direct-vent and atmospherically vented gas appliances.

The 03SRF is used on residential rooftop penetrations where steep pitch geometry requires an adjustable flashing rather than a fixed-angle unit. It is appropriate for installation on roofs with slopes between 6/12 and 12/12, covering the steeper half of typical residential roof pitch ranges. This flashing is intended for use with DVP-compatible 3-inch venting systems and pairs with standard vent pipe sections and storm collars to complete the roof termination assembly.

Key Features

• Adjustable design accommodates 6/12 to 12/12 roof pitch range
• 3-inch diameter sizing matches DVP-series vent pipe
• Designed to seal roof deck penetrations against water infiltration
• Suitable for steep-slope residential roofing applications
• Compatible with standard storm collar and vent termination components

Compatibility

Designed for use with 3-inch DVP-series venting systems on residential steep-pitch roof applications ranging from 6/12 to 12/12 slope.

Installation Notes

Installation is typically performed by a licensed HVAC technician or plumber in accordance with local mechanical codes and the appliance manufacturer venting instructions. Shut down and allow the connected appliance to cool completely before working on any vent components. The flashing should be integrated into the roofing underlayment and shingles using standard step-flashing technique and sealed with a roofing-grade sealant. A storm collar should be installed above the flashing base and sealed to the vent pipe after flashing installation is complete.

Technical Specifications

• Pipe Diameter: 3 inches
• Roof Pitch Range: 6/12 to 12/12

Standard Information

• Brand: DURAVENT
• Manufacturer Part Number: 03SRF