Dupont TY120SWH6X0025NF Disposable Coveralls 6XL 25 Pack

Product Description

The DUPONT TY120SWH6X0025NF is a size 6X-Large disposable coverall constructed from Tyvek 400, a flash-spun high-density polyethylene nonwoven material manufactured exclusively by DuPont. Weighing 1.2 oz per square yard with a material thickness of 5.90 mils, this garment delivers particle protection while maintaining the durability and breathability that Tyvek 400 is known for in limited-use protective apparel. The coverall features a front zipper with storm flap closure, serged seams, and elastic cuffs and ankles for a secure fit. It ships in a case of 25 units. Licensed HVAC technicians, painting contractors, remediation workers, and general maintenance trades specify this garment for single-use protective applications.

This coverall is suited for residential and commercial jobsite applications requiring particle-level protection. Typical use cases include lead and asbestos abatement and remediation, spray painting operations, general maintenance and operations, and general clean-up work. The elastic cuffs and ankles help reduce particulate infiltration at the wrists and ankles during active work. The white color is standard for identification in controlled-access work areas. With zero pockets and open construction, this is a straightforward garment for tasks where disposability and basic particle protection are the primary requirements.

Key Features

• Tyvek 400 flash-spun high-density polyethylene nonwoven construction at 1.2 oz material weight
• Front zipper closure with storm flap for added particle ingress protection
• Elastic cuffs and elastic ankles for secure, close-fitting coverage at extremities
• Serged seam construction provides seam integrity during physical activity
• Meets multiple standards including ASTM D1777, ASTM D3776, ASTM D774, ASTM D1683, ASTM D5034, AATCC 127, EN 1149-1, and OSHA 16 CFR 1610
• Sold in a case of 25 coveralls, ISO Non-Cleanroom class rated

Compatibility

Designed for use in lead and asbestos abatement and remediation, spray painting, general maintenance and operations, and general clean-up applications where disposable particle protection garments are required. Rated for Non-Cleanroom ISO class environments.

Installation Notes

Donning and doffing of disposable coveralls in abatement or remediation work areas should follow applicable OSHA 29 CFR 1926.1101 (asbestos) or 29 CFR 1926.62 (lead) procedures as relevant to the task. Power down or isolate any energized systems before entering confined work areas. Inspect the garment for tears or compromised seams before each use and discard immediately if damaged. Dispose of used coveralls in accordance with local, state, and federal regulations governing the waste type generated during the work activity.