Drill Rod Tool Steels 86235603 A2 Tool Steel Flat Stock

Product Description

The DRILL ROD TOOL STEELS 86235603 is an A2 air-hardening tool steel flat stock sized at 1 inch thick, 6 inches wide, and 18 inches long. A2 tool steel is an air-hardening, cold-work die steel known for its dimensional stability during heat treatment, moderate toughness, and good wear resistance. This flat stock is precision-ground to tight tolerances, making it suitable for toolmakers, machinists, and die makers who require consistent cross-section geometry before heat treatment or final machining. The piece weighs approximately 30.6 pounds and conforms to AISI A2 material specification.

A2 air-hardening flat stock is commonly used in the fabrication of dies, punches, jigs, fixtures, gauges, and cutting tools in industrial and toolroom environments. Its air-hardening characteristic reduces warping and distortion during the hardening process, making it a preferred choice for flat tooling components that must hold tight geometry. This bar stock is suitable for both prototype and production tooling applications where dimensional consistency is critical prior to heat treatment.

Key Features

• AISI A2 air-hardening tool steel for dimensional stability during heat treat
• Precision flat stock with tight thickness tolerance of plus or minus 0.001 inches
• Width tolerance held to plus 0.000 minus 0.005 inches for consistent fitment
• Length tolerance of plus or minus 0.062 inches
• Square tolerance of plus or minus 0.003 inches
• Ready for toolroom use, die making, punch fabrication, and fixture work

Compatibility

Designed as a standard AISI A2 air-hardening tool steel flat stock for use in toolroom, die shop, and machining applications requiring cold-work tool steel in flat bar form.

Installation Notes

This flat stock is typically handled and machined by toolmakers or machinists using conventional milling, grinding, and EDM equipment. Always wear appropriate PPE when cutting or grinding tool steel. Heat treatment should be performed by a qualified heat treater following established procedures for AISI A2 steel. Secure the workpiece properly before any machining operation to prevent movement and maintain tolerance integrity.