Drill Rod Tool Steels 85999936 A2 Tool Steel Flat Stock

Product Description

The DRILL ROD TOOL STEELS 85999936 is an A2 air-hardening tool steel flat stock bar measuring 3/4 inch thick, 1-3/4 inches wide, and 36 inches long. A2 tool steel is an air-hardening, cold-work die steel known for its dimensional stability during heat treatment and good wear resistance. This flat stock is ground to close tolerances, making it suited for tool and die work, punches, dies, gauges, and precision fixtures. Machinists, toolmakers, and die shops use this material when tight dimensional control and reliable hardening response are required.

This flat stock is intended for applications in tool and die making, jig and fixture fabrication, and precision machining environments. It is commonly used to produce blanking dies, forming dies, cutting tools, and wear-resistant components in both job-shop and production tool room settings. The 36-inch length provides stock for multiple workpieces from a single bar.

Key Features

• A2 air-hardening tool steel per AISI designation - stable dimensions during heat treatment
• Thickness tolerance of plus or minus 0.001 inches for tight fit-up in precision applications
• Width tolerance of plus 0.000 to 0.005 inches
• Length tolerance of plus or minus 0.250 to 0.500 inches
• Squareness: edge 0.003 inches and ends 0.004 inches per inch of thickness
• Ready-to-machine flat stock format reduces pre-machining setup time

Compatibility

Designed as a general-purpose A2 air-hardening tool steel flat stock suitable for tool room, die shop, and precision machining applications requiring AISI A2 material specification.

Installation Notes

Cutting and machining of tool steel flat stock should be performed by qualified machinists or toolmakers using appropriate metalworking equipment. Heat treatment, including hardening and tempering of A2 tool steel, should follow established metallurgical procedures and should be performed by qualified personnel using properly calibrated equipment. Always wear appropriate personal protective equipment when cutting, grinding, or machining tool steel. Follow facility safety and fire codes when performing any heat-treatment operations.