Drill Rod Tool Steels 06316905 A2 Flat Stock 10x18 in

Product Description

The DRILL ROD TOOL STEELS 06316905 is an A2 air-hardening tool steel flat stock bar intended for toolmakers, machinists, and die makers working with precision tooling applications. Measuring 0.25 inches thick, 10 inches wide, and 18 inches long, this flat stock ships in an annealed, machinable state ready for grinding, machining, and heat treating. A2 tool steel offers good toughness and wear resistance after air hardening, making it a widely used grade for blanking dies, forming dies, punches, and gauges. The piece weighs approximately 12.75 pounds and is produced to AISI Type A2 material specification.

This flat stock is suited for job shops, tool and die shops, and maintenance departments that fabricate or repair dies, molds, and precision fixtures. The 10 inch by 18 inch footprint supports moderate to large tool sections without the need for additional welding or joining. It is appropriate for applications requiring consistent through-hardening with minimal distortion during heat treatment, which is a key characteristic of the A2 air-hardening grade. Typical end users include tool and die makers and industrial machinists working in both prototype and production environments.

Key Features

• AISI A2 air-hardening tool steel grade for low distortion during heat treatment
• Dimensions: 0.25 inches thick x 10 inches wide x 18 inches long
• Thickness tolerance: +0.010 to +0.015 inches
• Width tolerance: +0.010 to +0.015 inches
• Length tolerance: +0.062 inches
• Square tolerance: +/- 0.003 inches

Compatibility

Designed as a standard A2 tool steel flat stock suitable for fabrication of blanking dies, forming dies, punches, gauges, and similar precision tooling components requiring air-hardening tool steel material.

Installation Notes

Cutting, grinding, and machining should be performed by qualified machinists using tooling appropriate for hardened or semi-hardened steel stock. Heat treating to full hardness must follow established A2 tool steel procedures including proper soak temperatures and controlled air cooling - consult the material manufacturer's heat treatment guidelines before processing. Always use appropriate PPE when grinding or cutting tool steel flat stock. Secure the workpiece properly before any machining operation to prevent movement.