Do It Best 549886 Pipe Heating Cable 120V 9 Ft

Product Description

The DO IT BEST 549886 is a 9-foot pipe heating cable designed to prevent water pipes from freezing in cold-weather conditions. Running at 120 volts and rated at 7 watts per foot, this cable delivers consistent heat along the full pipe length. It features a built-in thermostat that activates automatically when temperatures drop, a power indicator light for quick status checks, and a 3-wire grounded plug for safe installation. The weather-resistant PVC outer jacket and inner insulation protect the cable in outdoor and exposed interior environments. Licensed electricians or qualified plumbing professionals typically handle installation on residential and light commercial applications.

This heating cable is suited for residential and light commercial freeze-protection applications where exposed or vulnerable pipe runs require supplemental heat during winter months. It is approved for use on both rigid plastic and metal pipe. The cable is designed to keep water flowing in temperatures down to -40 degrees F, making it appropriate for cold-climate regions with severe winter conditions. Each package includes the cable, a grounded plug, the built-in thermostat, and installation instructions.

Key Features

• Rated at 7 watts per foot at 120 volts for consistent freeze protection
• Built-in thermostat activates automatically based on ambient temperature
• Power indicator light provides at-a-glance operational status
• Weather-resistant PVC outer jacket with inner insulation for durability in exposed locations
• Approved for use on rigid plastic and metal pipe
• Effective down to -40 degrees F
• UL listed for safety compliance

Compatibility

Approved for installation on rigid plastic and metal pipe in residential and light commercial freeze-protection applications requiring a 120-volt self-thermostat heating cable.

Installation Notes

Installation should be performed by a licensed electrician or qualified tradesperson in accordance with NEC guidelines for heating cable applications. Disconnect power at the circuit breaker before servicing or removing any existing heat tape or cable. Follow the included instruction sheet for proper cable routing and securing along the pipe. Do not overlap the cable on itself during installation, as this can create hot spots and damage the cable jacket.