Dico 7200061 Wheel Brush 6 Inch 80 Grit Abrasive Nylon

Product Description

The DICO 7200061 is a 6-inch diameter wheel brush designed for surface conditioning, deburring, and finishing applications in industrial and trade environments. It uses an arbor hole mount with a 5/8-inch round hole and is filled with abrasive nylon impregnated with aluminum oxide at 80 grit coarse grade. The crimped straight-wire fill flexes during contact to maintain consistent abrasive action across irregular surfaces. Rated at a maximum of 3,600 RPM, the brush suits bench grinders and arbor-mounted setups commonly used by machinists, fabricators, and maintenance technicians. It weighs 0.47 pounds.

This wheel brush is suited for light to medium surface prep work on metal, plastic, and composite materials. The abrasive nylon fill makes it appropriate for applications where aggressive wire bristles would cause surface damage, such as cleaning castings, removing scale, or finishing weld areas. The 3/8-inch face width provides a focused contact zone. It is a single-piece unit with no shank included, requiring a compatible arbor setup for mounting.

Key Features

• 6-inch outside diameter with 3/8-inch face width for a focused contact area
• Abrasive nylon fill with aluminum oxide at 80 grit coarse grade
• Crimped straight-wire configuration maintains consistent surface contact
• 5/8-inch round arbor hole fits standard bench grinder and arbor spindles
• 3,600 RPM maximum rated speed
• Non-encapsulated construction with no shank — arbor mount required

Compatibility

Designed for use with standard arbor hole bench grinders and arbor-mounted setups accepting a 5/8-inch round hole wheel brush. No specific machine model compatibility was provided by the manufacturer for this part.

Installation Notes

Installation requires a bench grinder or arbor spindle with a compatible 5/8-inch arbor and appropriate flanges and washers to seat the wheel securely. Always confirm the machine spindle speed does not exceed the 3,600 RPM maximum rating of the brush before operation. Disconnect and lock out power to the grinder before mounting or removing the wheel brush. Eye protection and appropriate PPE should be worn during operation per applicable shop safety standards.