Dewalt DAFE1H0410 Mounted Flap Wheel 40 Grit 3in

Product Description

The DEWALT DAFE1H0410 is a mounted flap wheel designed for aggressive material removal and surface blending on metal and similar substrates. This coated abrasive wheel measures 3 inches in diameter with a 1 inch face width and carries a coarse 40 grit aluminum oxide abrasive bonded to a cloth backing. It mounts via a 1/4 inch shank for use in die grinders and rotary tools. Rated to 20,000 RPM, it delivers consistent stock removal on welds, castings, and fabricated steel parts. Metalworkers, welders, and maintenance technicians are the primary installers and operators of this wheel type.

This flap wheel is suited for deburring, blending, and finishing operations in metal fabrication shops, maintenance facilities, and light industrial environments. The aluminum oxide abrasive and cloth backing handle ferrous metals well, making it a practical choice for weld seam blending and surface preparation ahead of coating or inspection. The coarse 40 grit cuts quickly on rough or scaled surfaces where finer grits would load or glaze prematurely. It is sold individually with a minimum order quantity of 10 units.

Key Features

• 40 grit coarse aluminum oxide abrasive for aggressive stock removal
• Cloth backing provides flexibility and conformability on contoured surfaces
• 1/4 inch shank mounts directly in standard die grinders and rotary tools
• 20,000 RPM maximum speed rating
• 3 inch diameter by 1 inch face width suits medium-scale blending passes
• No interleaf construction for consistent, direct abrasive contact

Compatibility

Designed for use with die grinders and rotary tools accepting a 1/4 inch shank mounted abrasive wheel. Confirm that the tool spindle speed does not exceed the 20,000 RPM rating of this wheel before use.

Installation Notes

A licensed or qualified operator should confirm die grinder spindle speed does not exceed the wheel maximum RPM rating before mounting. Disconnect or power off the tool completely before threading the shank into the collet and tightening. Wear appropriate eye protection and face shield per ANSI B11 and OSHA abrasive wheel safety requirements. Inspect the wheel for damage before each use and discard any wheel showing cracks, missing flaps, or backing separation.