Delta 2555ss-216ss Two Handle Centerset Lavatory Faucet

Product Description

The DELTA 2555ss-216ss is a two-handle centerset lavatory faucet finished in stainless, designed for residential bathroom sink installations requiring a 3-hole, 4-inch centerset layout. The spout stands 6.25 inches high and extends 5.125 inches, providing comfortable clearance for handwashing and daily use. A washerless stem cartridge valve delivers reliable, drip-resistant operation over long service life. Flow rate is rated at 1.5 gallons per minute at 60 psi, meeting common low-flow performance expectations. Licensed plumbers and experienced DIYers handle installation using standard hand tools and 1/2-inch IPS supply connections.

This faucet fits standard 3-hole lavatory sinks with 4-inch center spacing, making it a direct fit for most residential bathroom vanities and pedestal sinks in that configuration. The stainless finish coordinates with matching DELTA tub, shower, and Roman tub faucets in the same line, allowing consistent hardware selection across a bathroom remodel or new construction project. The two-handle design gives independent control of hot and cold supply, allowing precise temperature adjustment at the valve.

Key Features

• Washerless stem cartridge valve for drip-resistant, long-term performance
• 1.5 gpm flow rate at 60 psi for water-efficient operation
• 6.25-inch spout height and 5.125-inch spout reach for practical sink clearance
• 1/2-inch IPS supply connections for compatibility with standard rough-in plumbing
• 3-hole, 4-inch centerset installation for common residential sink configurations
• Stainless finish coordinates with matching tub, shower, and Roman tub faucets

Compatibility

Designed for 3-hole lavatory sinks with 4-inch centerset spacing and 1/2-inch IPS supply lines, typical of standard residential bathroom vanities and pedestal sinks.

Installation Notes

Installation is performed by a licensed plumber or qualified tradesperson following local plumbing codes and IPC guidelines. Shut off the hot and cold supply stops and relieve line pressure before beginning work. Use thread sealant tape or pipe dope on all 1/2-inch IPS threaded connections and verify no leaks under pressure before closing up the cabinet. Do not overtighten plastic supply nuts, as this can crack the faucet body or valve seats.

Technical Specifications

• Installation Type: 3-hole, 4-inch centerset
• Connection Type: 1/2-inch IPS
• Flow Rate: 1.5 gpm at 60 psi (5.7 L/min at 414 kPa)
• Valve Type: Washerless stem cartridge
• Spout Height: 6.25 inches
• Spout Length: 5.125 inches
• Finish: Stainless
• Handle Configuration: Two handle

Standard Information

• Brand: DELTA
• Manufacturer Part Number: 2555ss-216ss