De-sta-co 614-M Straight Line Action Clamp 1124 Lb

Product Description

The DE-STA-CO 614-M is a standard straight line action clamp designed for workholding and fixturing applications in industrial and manufacturing environments. It delivers a rated load capacity of 1124.05 lb (5000 N) and features a round plunger with 1.26 inches of travel, an internal M8x1.25 threaded plunger, and a straight red handle. The flanged base mounts through two holes and provides a stable, low-profile footprint. Built from carbon steel, this clamp is suited for high-cycle production fixtures where consistent clamping force and repeatable positioning are required. Licensed machinists, toolmakers, and fixture builders are the typical installers.

The 614-M is used in production jigs, welding fixtures, machining stations, and assembly tooling where a direct, in-line clamping action is needed. The straight line action drives the plunger forward along a single axis, making it well matched to applications that require the clamp to push against a workpiece without side loading. Its compact overall length of 5.7 inches and overall height of 6.0 inches allow integration into tight fixture layouts. The flanged base with two mounting holes simplifies attachment to fixture plates and tombstones.

Key Features

• 1124.05 lb (5000 N) rated load capacity for high-force workholding
• 1.26 inches of plunger travel with round, internally threaded M8x1.25 plunger
• Flanged base with two mounting holes spaced 0.94 inches apart center-to-center
• Plunger diameter of 0.35 inches and centerline height of 0.69 inches
• Carbon steel construction for durability in production environments
• Straight red handle for quick manual actuation

Compatibility

Designed as a standard straight line action clamp for use in industrial workholding, fixturing, and clamping applications requiring an in-line plunger force.

Installation Notes

Installation is performed by toolmakers or fixture engineers using standard fasteners through the two flanged base mounting holes. Power down or de-energize any associated automated equipment before servicing or repositioning the clamp in a live fixture. The M8x1.25 internal plunger thread accommodates a customer-supplied plunger tip or contact pad to suit the workpiece. Use the jam nut (M24x1.5 thread, 1.42-inch hex) to lock plunger depth after adjustment.