Dap D7565010030 Fireblock Foam Sealant 12 Oz

Product Description

The DAP D7565010030 is a single-component, self-extinguishing polyurethane foam sealant engineered to block the passage of flames, smoke, and gases through penetrations in fire-rated assemblies. Dispensed from a 12 oz spray can, the orange-colored foam expands on contact with moisture, filling irregular voids around pipes, conduit, and ducts that pass through walls, floors, and ceilings. It reaches full cure in 1 hour and delivers a tensile strength of 26 psi. The orange pigmentation provides visual confirmation that a fire-rated sealant has been applied, which simplifies inspection. Licensed HVAC technicians, plumbers, and electricians install this product as a code-required firestop measure at penetrations in fire-rated construction.

This foam sealant is rated for HVAC, plumbing, and electrical applications where through-penetration firestopping is required. Typical use cases include sealing around copper, PVC, CPVC, steel pipe, electrical conduit, and flex duct penetrations through fire-rated walls and floor assemblies in both residential and light commercial construction. The product is applied at ambient temperatures between 60 and 100 degrees F. Its self-extinguishing formulation is designed to meet the requirements of projects governed by fire codes that mandate listed firestop products at service penetrations.

Key Features

• Self-extinguishing, flame-resistant foam meets fire-rated assembly requirements at through-penetrations
• Full cure achieved in 1 hour, minimizing inspection wait time on job sites
• Tensile strength of 26 psi provides durable adhesion across irregular substrates
• Orange color provides visible, inspectable indication of firestop application
• 12 oz spray can format allows single-handed application in tight spaces
• Rated for application temperatures from 60 to 100 degrees F

Compatibility

Designed for firestopping HVAC, plumbing, and electrical penetrations through fire-rated wall and floor assemblies in residential and light commercial construction.

Installation Notes

Installation should be performed by a licensed trade professional in accordance with applicable fire codes and the requirements of the authority having jurisdiction. Verify that the surface temperature falls within the 60 to 100 degrees F application range before dispensing. Shut off all utilities serving the penetration area prior to sealing work and allow a minimum of 1 hour for full cure before covering or painting the sealant. Do not apply over wet surfaces or in confined spaces without adequate ventilation, as the formulation contains solvent-based propellants.

Technical Specifications

• Type: Self-Extinguishing, Flame Resistant Foam Sealant
• Container Size: 12 oz
• Container Type: Spray Can
• Color: Orange
• Full Cure Time: 1 hour
• Tensile Strength: 26 psi
• Application Temperature: 60 to 100 degrees F
• Density: 1.09 g/cc
• VOC: 166 to 166.2 g/L
• Shelf Life: 12 months
• Odor: Solvent
• Standards and Approvals: ASTM E-814, ASTM C-518, ASTM D-1621, ASTM D-1622, ASTM D-1623, ASTM D-2856, UL-175
• Warranty: Limited

Standard Information

• Brand: DAP
• Manufacturer Part Number: D7565010030