Danner 2531 Automatic Pool Cover Pump 360 Gph Ght

Product Description

The DANNER 2531 is an automatic submersible cover pump designed to remove standing water from pool covers, preventing damage from water weight and debris accumulation. The pump delivers 360 gallons per hour and includes a 25-foot power cord for flexible placement around the pool deck. An electronic water-level sensor activates the pump automatically when water reaches 2 inches in depth and shuts it off once the cover is clear. The GHT outlet connects directly to a standard garden hose for convenient discharge routing. Licensed pool service technicians and knowledgeable DIYers install this unit at the start of pool closing season and throughout winter maintenance cycles.

This pump is suited for residential inground and aboveground pool covers where seasonal water accumulation is a routine concern. It handles a maximum pumping height of 9 feet, making it practical for routing discharge away from the pool area. A 1/2-inch adapter is included for compatibility with standard flexible tubing when a garden hose connection is not available or practical at the discharge point.

Key Features

• Electronic sensor activates pump automatically at 2 inches water depth and shuts off when water clears
• 360 GPH flow rate handles typical pool cover water accumulation efficiently
• 25-foot power cord provides reach without an extension cord in most residential installations
• GHT outlet connects directly to a standard garden hose for discharge routing
• 9-foot maximum pumping height supports uphill discharge runs
• Includes 1/2-inch tubing adapter for installations where a garden hose is not used

Compatibility

Designed as a direct-fit automatic cover pump for residential pool cover applications requiring a GHT discharge connection and electronic water-level sensing.

Installation Notes

Installation is typically performed by pool service professionals or experienced owners during pool winterization. Before placing the pump on the cover, confirm the cover is properly secured to the pool perimeter and can support the weight of the pump. Route the discharge hose away from the pool equipment pad to prevent water from cycling back onto the cover. Disconnect and store the pump at the end of the winter season to protect the electronic sensor and motor from freeze damage.