Crc 1003665 Brake Parts Cleaner 1 Gallon Bottle

Product Description

The CRC 1003665 is a flammable, acetone-based brake parts cleaner packaged in a 1-gallon bottle. It is formulated to cut through brake fluid, grease, oil, and other contaminants that accumulate on brake system components during normal service intervals. The product is non-chlorinated and carries a VOC content of 10.0 percent (78.00 g/L), making it compliant with applicable VOC regulations. It is intended for use by automotive technicians and fleet maintenance professionals performing brake inspections, pad replacements, rotor service, or full caliper overhauls.

This cleaner is suited for vehicle maintenance environments including automotive shops, fleet yards, and heavy equipment service bays. It is applied directly to brake linings, brake pads, calipers, wheel cylinders, drums, disc brake parts, clutches, CV joints, and springs to dissolve and flush away contamination before reassembly or inspection. The clear, fast-evaporating formula leaves no residue, supporting clean, dry mating surfaces prior to component installation.

Key Features

• Non-chlorinated acetone formula with no residue after evaporation
• Removes brake fluid, grease, oil, and other contaminants
• 10.0 percent VOC content (78.00 g/L) for regulatory compliance
• Flash point of 32 degrees F — flammable, requires proper ventilation and ignition-source control
• Meets ACGIH, NIOSH, and OSHA 29 CFR 1910.1000 standards
• 1-gallon bottle suitable for shop use and repeated application

Compatibility

Designed for use on brake linings, brake pads, calipers, wheel cylinders, drums, disc brake parts, clutches, CV joints, and springs across vehicle maintenance applications.

Installation Notes

Applied by automotive and fleet maintenance technicians during brake system service. Always work in a well-ventilated area away from open flames, sparks, and other ignition sources — this product has a flash point of 32 degrees F and is classified flammable. Wear appropriate PPE including chemical-resistant gloves and eye protection in accordance with OSHA 29 CFR 1910.1000. Allow all treated surfaces to dry completely before reassembly.