Crc 1003295 Penetrant Lubricant 16 Oz Food Grade Silicone

Product Description

The CRC 1003295 is a food-grade silicone penetrant lubricant packaged in a 16 oz aerosol can. It lays down a non-drying film that penetrates tight clearances, frees binding components, and provides lasting lubrication without hardening or cracking over time. The silicone-based formula carries NSF H1 registration, making it suitable for use in environments where incidental food contact is possible. It handles a wide service temperature range from -40 degrees F to 400 degrees F and meets VOC compliance standards at 399.80 g/L. HVAC technicians, plumbers, and food-facility maintenance professionals rely on this product for routine lubrication and penetration tasks.

This penetrant lubricant is used across residential and commercial applications wherever a food-safe, non-drying silicone film is required. Typical scenarios include lubricating valve stems, O-rings, gaskets, linkages, and sliding components in HVAC equipment, plumbing assemblies, and food-processing or food-service environments. Its aerosol delivery makes it practical for hard-to-reach fittings and enclosed mechanical assemblies. The clear-white color allows visual confirmation of coverage without staining surrounding surfaces.

Key Features

• NSF H1 registered — food-grade safe for incidental food-contact applications
• Non-drying silicone film composition stays flexible and does not crack or harden
• Wide service temperature range: -40 degrees F to 400 degrees F
• VOC compliant at 399.80 g/L (3.33 lb/gal)
• 16 oz aerosol can with 10 oz net fill for targeted, controlled application
• Meets USDA and RoHS compliance standards

Compatibility

Designed as a general-purpose food-grade penetrant lubricant suitable for metal, rubber, and plastic components in HVAC, plumbing, and food-service equipment where silicone-based, non-drying film lubricants are specified.

Installation Notes

Applied by licensed HVAC technicians, plumbers, and qualified maintenance personnel. Shut down and de-energize equipment before applying to components near electrical contacts or heat sources. The formula is flammable — keep away from open flames, pilot lights, and ignition sources during application and until fully dry. Use in well-ventilated areas and consult the Safety Data Sheet before use in confined spaces.