Cratex 206 M Surface Grinding Wheel 2in Silicon Carbide

Product Description

The CRATEX 206 M is a small-diameter surface grinding wheel built for precision deburring, polishing, and surface conditioning work. At 2 inches in diameter and 3/8 inches thick with a 1/4 inch arbor hole, this wheel is sized for use on rotary tools, die grinders, and bench-mounted spindles. The abrasive matrix combines silicon carbide grit in a rubber bond at a medium grade, which delivers controlled cut rates and a smooth surface finish without aggressive stock removal. Rated to 10,500 RPM, this wheel is appropriate for light-duty material removal tasks across a range of metals and coated surfaces.

This wheel is suited for corrosion removal, rust elimination, heat mark cleanup, excess solder removal, scratch blending, tarnish removal, and general smoothing and polishing operations. It is a practical choice for metalworking, electrical, plumbing, and HVAC technicians who need a compact wheel for detail work, tight-clearance deburring, or surface prep before fitting components. The rubber bond construction provides some flexibility, making it less prone to loading than vitrified wheels when working on softer metals or contoured surfaces.

Key Features

• Silicon carbide abrasive in a rubber bond for controlled, flexible cutting action
• Medium grade for balanced material removal and surface finish quality
• Rated to 10,500 RPM for use with standard rotary and die grinder equipment
• Compact 2 inch diameter and 3/8 inch thickness for detail and close-quarter work
• 1/4 inch arbor hole fits common rotary tool and grinder spindle sizes
• No recess design for straightforward mounting and full-face contact

Compatibility

Designed for use in corrosion removal, deburring, excess solder cleanup, heat mark removal, polishing, rust removal, scratch blending, smoothing, and tarnish removal operations on rotary tools and die grinders accepting a 1/4 inch arbor and operating at or below 10,500 RPM.

Installation Notes

Install this wheel on a tool rated for the arbor size and RPM before mounting. Always power down and disconnect the tool before changing wheels. Inspect the wheel for cracks or chips before each use and do not operate above the rated 10,500 RPM. Eye protection and appropriate PPE should be worn during all grinding and surface conditioning operations.