Cooper Bussmann CCP-1-30CF Cam Disconnect Switch 30A

Product Description

The COOPER BUSSMANN CCP-1-30CF is a fused, open-enclosure cam disconnect switch rated for 30 amps at 1 phase. It is designed to provide a safe, visible means of disconnecting power in electrical distribution and motor control applications. The switch features a single-pole, single-wire configuration and carries an IP20 ingress protection rating, making it suitable for protected indoor installations. Licensed electricians typically specify and install this type of disconnect during panel work, equipment service, or new equipment hookups where a local means of isolation is required by code.

This cam disconnect switch is suited for residential and light commercial electrical systems where a compact, open-style fused disconnect is needed. Its 30-amp rating and 1-1/2 horsepower capacity at 120 volts make it appropriate for small motor loads, HVAC equipment circuits, and similar single-phase branch circuit applications. The open enclosure style is intended for use inside an existing enclosure or panel cabinet where additional housing is already provided.

Key Features

• 30-amp fused disconnect with single-pole, single-wire construction
• Open enclosure design rated IP20 for use inside protected housings
• 1-1/2 hp motor capacity at 120 volts for small motor circuit applications
• Compact footprint: 3.5 inches height, 4.5 inches width, 3 inches depth
• Certified to UL Listed 98, cULus 22.2 No. 4-04, CE, and RoHS Compliant standards

Compatibility

Designed as an OEM-style fused cam disconnect switch for single-phase electrical circuits requiring a 30-amp, 1-pole isolation device within a protected enclosure environment.

Installation Notes

Installation should be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and all applicable local codes. De-energize the circuit completely and verify absence of voltage with a meter before handling or wiring the switch. The open enclosure style requires mounting inside a suitable rated enclosure to maintain proper protection for the installation environment. Verify fuse ratings and circuit ampacity are matched to the connected load before restoring power.