Continental Contitech 20019032 Sandblast Hose 1 in Id

Product Description

The CONTINENTAL CONTITECH 20019032 is a synthetic rubber sandblast hose designed for abrasive media delivery in industrial and contractor blasting applications. The hose features a 1-inch inside diameter and a 1.88-inch outside diameter, built to handle a working pressure of 150 psi. The green synthetic rubber construction provides resistance to the wear and abrasion generated by high-velocity blast media. It is sold in 1-foot increments with a 10-foot minimum cut length and is supplied as a 50-foot total coil. Sandblast equipment technicians and industrial contractors are the primary installers of this hose type.

This hose is suited for sandblasting and abrasive blasting operations in commercial, industrial, and infrastructure maintenance settings. Typical applications include surface preparation on structural steel, concrete, and equipment housings. The 1-inch ID supports adequate media flow for mid-scale blasting rigs. The coil format makes it practical for job-site deployment where longer runs are needed. It is priced and cut in 1-foot increments, with a 10-foot minimum order and a 50-foot maximum per coil.

Key Features

• 1-inch inside diameter for mid-volume abrasive media flow
• 1.88-inch outside diameter synthetic rubber construction resists abrasion and wear
• 150 psi working pressure rating for standard blasting equipment
• Green color coding for quick hose identification on the job site
• Sold in 1-foot increments with a 10-foot minimum cut length
• 50-foot total coil length per unit

Compatibility

Designed as a replacement or extension hose for industrial sandblasting and abrasive blasting systems requiring a 1-inch ID sandblast hose rated to 150 psi.

Installation Notes

Installation should be performed by qualified industrial equipment technicians or sandblasting contractors familiar with high-pressure hose assemblies. Depressurize and lock out the blasting system completely before connecting or disconnecting hose sections. Inspect hose ends and couplings for wear or damage before pressurizing. Do not exceed the 150 psi working pressure rating of this hose.