Climax Metal Products C733M-18 Shaft Locking Device

Product Description

The CLIMAX METAL PRODUCTS C733M-18 is a shaft locking device designed to secure rotating components to shafts in mechanical power transmission systems. With an 18mm bore diameter and 44mm outer diameter, this device uses four M5 screws to clamp onto the shaft and transmit axial loads up to 2,376 pounds. The thrust ring width measures 0.472 inches and overall width is 44mm. Maximum torque capacity is 99 ft/lb. Licensed mechanical technicians and maintenance professionals install this type of device in industrial and commercial equipment where precise shaft retention is required.

The C733M-18 is suited for use in rotating shaft assemblies found in industrial machinery, conveyor systems, and mechanical drive applications. It is installed where a secure, removable shaft retention solution is needed without permanent modification to the shaft. The M5 thread pattern and four-screw configuration allow even clamping force distribution around the shaft circumference for consistent axial load performance.

Key Features

• 18mm bore diameter with 44mm outer diameter for defined shaft and housing fitment
• Four M5 screws provide even clamping load distribution
• Rated axial load capacity of 2,376 pounds
• Maximum torque rating of 99 ft/lb
• Thrust ring width of 0.472 inches for precise axial positioning
• 44mm overall width for compact shaft engagement

Compatibility

Designed as an OEM-style shaft locking device for mechanical power transmission assemblies with an 18mm shaft diameter and M5 thread fastener configuration.

Installation Notes

Installation and removal should be performed by qualified mechanical technicians familiar with shaft retention hardware. Disengage and lock out all power sources to the equipment before servicing any rotating shaft components. Screws should be tightened in a cross pattern to ensure even clamp force distribution around the shaft. Do not exceed the rated torque or axial load specifications for this device.