Climax Metal Products C193M-10 Shaft Locking Device

Product Description

The CLIMAX METAL PRODUCTS C193M-10 is a shaft locking device designed to secure rotating components to shafts in industrial and mechanical drive applications. The device features a 10mm bore diameter and a 15/16-inch outer diameter, with an overall width of 1-1/16 inches. Three M4 set screws provide clamping force, generating a maximum axial load rating of 1,643 pounds and a maximum torque rating of 323 ft-lb. The thrust ring width measures 0.394 inches. This type of collar-style locking device is typically installed by maintenance technicians and mechanical assemblers working on power transmission equipment.

The C193M-10 is suited for use on 10mm shafts in light-to-medium-duty industrial machinery, conveyor systems, pump assemblies, and similar rotating equipment where positive shaft retention is required. Its compact outer diameter makes it appropriate for space-constrained drive train configurations. The three-screw design distributes clamping load evenly around the shaft for consistent holding performance.

Key Features

• 10mm bore diameter fits standard metric shaft sizes
• Three M4 set screws for balanced, distributed clamping force
• 1,643-pound axial load rating for reliable shaft retention
• 323 ft-lb maximum torque capacity
• Compact 15/16-inch outer diameter suits tight installation envelopes
• 0.394-inch thrust ring width for precise axial positioning

Compatibility

Designed as an OEM-style shaft locking device for 10mm diameter shafts in industrial power transmission and rotating equipment assemblies.

Installation Notes

Installation is typically performed by qualified mechanical technicians or millwrights. De-energize and lock out all power sources before servicing any rotating equipment per applicable OSHA lockout/tagout procedures. Use a calibrated torque wrench to tighten the M4 set screws evenly in a cross pattern to reach the specified clamping load; do not exceed the rated screw torque. Verify shaft surface condition and diameter tolerance before installation to ensure proper seating and holding performance.