Charlotte Pipe S/M060040600 Sdr 35 Pvc Sewer Pipe 4x10

Product Description

The Charlotte Pipe Foundry S/M060040600 is a 4-inch SDR 35 solid-wall PVC sewer pipe, 10 feet in length, manufactured to ASTM D-3034 standards. It features a bell end for solvent-weld joining and is finished in the industry-standard green color that identifies non-pressure sewer main pipe. This pipe is engineered for gravity-flow underground sewer main applications and is a staple in residential and light commercial drainage systems installed by licensed plumbers and pipeline contractors.

This pipe is designed for non-pressure sewer main applications, typically installed below grade to carry sanitary waste from structures to municipal or private sewer systems. The SDR 35 wall rating balances adequate crush resistance for typical burial depths with cost efficiency on long mainline runs. It meets ASTM D-3034 requirements, making it acceptable under most municipal sewer specifications and model plumbing codes for gravity drain applications.

Key Features

• SDR 35 solid wall construction built to ASTM D-3034 specifications
• 4-inch diameter by 10-foot length suits standard residential sewer main sizing
• Bell end accepts solvent-weld joints for a reliable, watertight connection
• Green color coding provides instant field identification as non-pressure sewer pipe
• Rated for non-pressure gravity-flow sewer main service only

Compatibility

Designed as an OEM-style replacement and new-installation component for non-pressure, gravity-flow PVC sewer main systems conforming to ASTM D-3034.

Installation Notes

Installation must be performed by a licensed plumber in accordance with applicable local codes, the International Plumbing Code (IPC), and project-specific municipal sewer requirements. Trench preparation, bedding material, and burial depth must conform to local specifications to maintain pipe integrity and rating. Apply solvent cement rated for PVC sewer pipe per manufacturer instructions, and allow full cure time before backfilling. This pipe is rated for non-pressure gravity applications only and must not be used in pressurized water supply or force-main service.