Charlotte Pipe PVC20007B0600 Sdr 21 Pvc Pipe 3/4 in X 20 Ft

Product Description

The Charlotte Pipe Foundry Co. PVC20007B0600 is a solid-wall SDR 21 PVC pressure pipe rated for 200 PSI service. It measures 3/4 inch in diameter and comes in 20-foot lengths with a bell end for solvent-weld or gasketed joining. Manufactured to ASTM D-2241 and certified to NSF Standard 14 and 61, this pipe is built for potable water and general pressure-distribution applications. Licensed plumbers and irrigation contractors are the primary installers. The SDR 21 dimension ratio delivers consistent wall thickness and reliable pressure performance across the full length of each stick.

This pipe is suited for residential and light commercial pressure piping systems including potable water supply lines, irrigation mains, and water service laterals. The bell end simplifies in-line connections without additional fittings at every joint. Its 200 PSI pressure rating makes it appropriate for municipal and private water distribution systems operating within standard residential pressure ranges. Each package contains 10 sticks, making it practical for larger installations requiring multiple runs of 3/4-inch pressure pipe.

Key Features

• 200 PSI pressure rating for reliable performance in potable water and irrigation pressure systems
• SDR 21 dimension ratio ensures uniform wall thickness along the full 20-foot length
• Bell end factory-formed on each stick for straightforward in-line joining
• Solid wall construction with no voids or cellular core
• ASTM D-2241 compliance confirms dimensional and pressure standards are met
• NSF Standard 14 and 61 certification supports use in potable water applications

Compatibility

Designed for use in SDR 21 PVC pressure piping systems conforming to ASTM D-2241. Compatible with standard 3/4-inch PVC pressure fittings, couplings, and solvent-weld or gasketed bell-end joining methods appropriate to this pipe series.

Installation Notes

Installation should be performed by a licensed plumber or qualified irrigation contractor in accordance with local plumbing codes and applicable ASTM standards. Shut off and depressurize the water system before cutting into any existing line. Use a fine-tooth saw or pipe cutter rated for PVC, and deburr cut ends before applying primer and solvent cement where solvent-weld joints are used. Do not exceed the rated pressure of 200 PSI, and account for temperature derating when operating in high-temperature environments.