Charlotte Pipe pvc-323-10in Pvc Dwv Street 45 Elbow 10 in

Product Description

The CHARLOTTE PIPE pvc-323-10in is a 10-inch PVC Schedule 40 street 45-degree elbow designed for drain, waste, and vent (DWV) piping systems. This fitting accepts a spigot on one end and a socket on the other, allowing it to connect directly to the hub of another fitting without a short pipe section in between. Rated to 480 psi and 140 degrees F, it delivers the structural integrity and temperature tolerance required in commercial and residential DWV installations. Licensed plumbers and pipefitters install this fitting using standard solvent-weld technique with approved primer and solvent cement.

This elbow is suited for 10-inch DWV drain and vent lines in large-diameter commercial plumbing systems, multi-family residential construction, and industrial waste piping. The 45-degree angle allows for gradual directional changes in horizontal drain runs and stack offsets. Its solid PVC Schedule 40 wall construction provides better sound-deadening characteristics compared to foam-core alternatives, making it a preferred choice where noise transmission through walls or floors is a concern.

Key Features

• Street configuration: spigot inlet connects directly to another fitting hub, reducing fittings count
• 45-degree angle for gradual directional transitions in drain and vent runs
• Schedule 40 solid PVC wall construction for high tensile and impact strength
• Rated to 480 psi and 140 degrees F for reliable service in demanding DWV applications
• Slip-on solvent-weld connection for fast, secure installation with standard primer and cement
• Better sound-deadening performance than foam-core PVC DWV fittings

Compatibility

Designed as an OEM-style replacement and new-installation fitting for 10-inch Schedule 40 PVC DWV piping systems using solvent-weld connections.

Installation Notes

Installation must be performed by a licensed plumber in accordance with applicable plumbing codes, including IPC and local authority requirements. Shut off water supply and verify the line is depressurized and drained before cutting into an existing system. Use only approved PVC primer and solvent cement rated for Schedule 40 DWV applications, applying primer to both mating surfaces before cement per manufacturer instructions. Allow full cure time before restoring flow to the line.

Technical Specifications

• Fitting Size: 10 inches
• Water Connection Size: 10 inches
• Angle: 45 degrees
• Pressure Rating: 480 psi
• Temperature Rating: 140 degrees F
• Connection Type: Slip-On (Solvent Weld)
• Material: PVC Schedule 40
• Schedule: Schedule 40

Standard Information

• Brand: CHARLOTTE PIPE
• Manufacturer Part Number: pvc-323-10in