Charlotte Pipe Pvc 08116 1600HA Pvc Sch 80 Cap 1-1/4 in

Product Description

The Charlotte Pipe PVC 08116 1600HA is a Schedule 80 PVC slip cap designed to terminate or seal the end of a 1-1/4 inch PVC pipeline. Manufactured from rigid gray PVC, this cap meets the dimensional and pressure requirements of Schedule 80 fittings, making it suitable for higher-pressure applications compared to Schedule 40. It connects via a slip socket, accepting standard 1-1/4 inch pipe for solvent-cement joining. Plumbers, pipefitters, and industrial maintenance technicians install this fitting in both above-ground and below-ground piping systems where a clean, pressure-rated end termination is required.

This cap is used in residential and commercial plumbing, irrigation, industrial process piping, and chemical distribution lines where PVC is an approved material. Schedule 80 fittings are commonly specified when system pressures or mechanical stress demands a heavier wall thickness than Schedule 40. The slip connection style requires standard PVC primer and solvent cement per applicable plumbing codes. Sold in a package quantity of 10 units, making it practical for contractors managing multiple termination points on a project.

Key Features

• Schedule 80 wall thickness rated for higher operating pressures than Schedule 40
• Slip socket connection accepts standard 1-1/4 inch PVC pipe for solvent-cement joining
• Gray rigid PVC construction resistant to corrosion and many common chemicals
• Provides a clean, pressure-rated end termination for PVC piping systems
• Sold in a package of 10 units for efficient job-site use

Compatibility

Designed as an OEM-style fitting compatible with standard 1-1/4 inch Schedule 80 PVC piping systems. Also referenced as Universal Product 847-012.

Installation Notes

Installation should be performed by a licensed plumber or qualified pipefitter in accordance with local plumbing codes and ASTM standards for solvent-cemented PVC joints. Depressurize and drain the line completely before cutting into or capping any existing piping. Use approved PVC primer followed by solvent cement rated for Schedule 80 fittings, and allow full cure time before restoring pressure. Do not use this fitting with threaded connections or adhesives not rated for PVC.