Charlotte Pipe Pvc 07300 0200HA Sch 40 Pvc Dwv Pipe 3x2

Product Description

The CHARLOTTE PIPE FOUNDRY CO. PVC 07300 0200HA is a Schedule 40 PVC DWV pipe section measuring 3 inches in diameter and 2 feet in length. This pipe is dual-rated for drain, waste, and vent (DWV) applications as well as cold water pressure service up to 260 psi. It is manufactured from rigid PVC, making it resistant to corrosion, chemical attack, and scale buildup. Licensed plumbers and pipefitters install this pipe in residential and light commercial plumbing systems where a durable, code-compliant DWV or cold water pressure solution is required.

This pipe section is suited for new construction and retrofit plumbing projects where 3-inch Schedule 40 PVC is specified. Its dual-rated design allows use in both gravity-flow drain and waste lines and pressurized cold water distribution up to 260 psi. The 2-foot length is practical for tight runs, transitions, and stub-outs where cutting a full-length stick would create unnecessary waste. Typical applications include horizontal drain runs, vertical vent stacks, and cold water branch lines in residential and light commercial buildings.

Key Features

• Dual-rated for DWV and 260 psi cold water pressure service
• Schedule 40 wall thickness for standard residential and commercial plumbing
• 3-inch diameter accommodates typical lavatory, sink, and toilet drain connections
• 2-foot length reduces on-site cutting waste for short runs and transitions
• PVC construction resists corrosion, scale, and common drain chemicals

Compatibility

Designed as an OEM-style replacement and new-installation component compatible with standard Schedule 40 PVC DWV fittings, couplings, and solvent-weld joints in 3-inch residential and light commercial plumbing systems.

Installation Notes

Installation should be performed by a licensed plumber in accordance with the International Plumbing Code (IPC) and applicable local amendments. Solvent-cement joints require proper primer and PVC cement rated for Schedule 40 pipe — follow manufacturer instructions for cure time before pressurizing or flowing waste. Support spacing must meet code requirements for horizontal runs to prevent sagging. Always inspect cut ends for burrs and deburr before assembly to ensure a sound joint.