Charlotte Pipe Pvc 04010 1000HC Sch 40 Pvc Pipe 1in X 5ft

Product Description

The CHARLOTTE PIPE FOUNDRY CO. PVC 04010 1000HC is a Schedule 40, solid-wall PVC pipe rated for cold water service. Cut to a 1-inch nominal diameter and 5-foot length, this plain-end pipe is pressure-rated at 370 psi and listed to ASTM D1785. It is suitable for residential and light commercial plumbing rough-in, irrigation laterals, and cold water distribution systems. Licensed plumbers and pipe fitters are the primary installers. The plain end accepts solvent-weld fittings sized for 1-inch Schedule 40 PVC.

This pipe is intended for cold water service only and is not rated for hot water distribution or pressure steam applications. It is commonly used in residential water supply rough-in, underground cold water mains, irrigation systems, and general-purpose liquid transfer where PVC is code-approved. Each unit is sold as a single 5-foot stick. The pipe ships in a package quantity of 5 sticks, making it practical for smaller repair jobs or topping off a partial order. NSF listing supports use in potable water systems where local codes permit PVC piping.

Key Features

• Schedule 40 solid wall construction rated at 370 psi for cold water service
• 1-inch nominal diameter, 5-foot length with plain ends for solvent-weld joints
• Complies with ASTM D1785 dimensional and pressure standards
• NSF listed for potable cold water applications
• Package quantity of 5 sticks per unit of measure

Compatibility

Designed as an OEM-style replacement and standard-stock pipe for use with 1-inch Schedule 40 PVC solvent-weld fittings in cold water plumbing and irrigation systems. Compatible with any ASTM D1785 Schedule 40 PVC fitting sized for 1-inch nominal pipe.

Installation Notes

Installation is performed by licensed plumbers or qualified pipefitters in accordance with the International Plumbing Code (IPC) and applicable local codes. Cut pipe square using a pipe cutter or miter saw, deburr the cut end, and clean both mating surfaces before applying PVC primer and solvent cement per ASTM F656 procedures. This pipe is rated for cold water only — do not use in hot water supply, steam, or pressure applications exceeding its rated psi. Shut off and depressurize the supply system completely before cutting into any existing line.