Charlotte Pipe Pvc 02108 1800HA 1-1/2x1 in Pvc Reducer Bushing

Product Description

The CHARLOTTE PIPE FOUNDRY CO. PVC 02108 1800HA is a white PVC reducer bushing used to reduce pipe size within a plumbing or irrigation line. It features a spigot inlet and a threaded outlet, allowing it to transition from a 1-1/2 inch line down to a 1 inch threaded fitting. Manufactured from schedule 40 PVC, this bushing meets ASTM D 2466 requirements. It is a standard component installed by plumbers and irrigation technicians wherever a pipe size reduction is needed in a low-pressure PVC system.

This reducer bushing is designed for use in sprinkler and irrigation systems where PVC pipe connections require a size transition. The spigot end inserts into a standard socket fitting, while the threaded end accepts a 1 inch male or female threaded PVC fitting. It is suited for residential and light commercial landscape irrigation installations. Packaged in quantities of 25, it is practical for contractors completing multiple connections on a single job site.

Key Features

• Reduces pipe from 1-1/2 inches to 1 inch in a single fitting
• Spigot x thread end configuration for versatile connection options
• White PVC construction rated to ASTM D 2466
• Suited for sprinkler and irrigation system piping
• Sold in a package quantity of 25 units

Compatibility

Designed as an OEM-style replacement or new-installation fitting for residential and commercial PVC irrigation and sprinkler piping systems using 1-1/2 inch spigot and 1 inch threaded connections conforming to ASTM D 2466.

Installation Notes

Installation is typically performed by a licensed plumber or irrigation technician. Shut off the water supply and relieve system pressure before making any connections. The spigot end is solvent-welded into a compatible socket fitting using PVC primer and cement per manufacturer and local code requirements. The threaded end should be hand-tightened and then wrench-tightened with PTFE thread seal tape applied to the male threads; do not overtighten, as PVC threads can crack under excessive torque.