Charlotte Pipe Pvc 00117X 0800HA Sd Adapter Bushing 4x3 in

Product Description

The CHARLOTTE PIPE FOUNDRY CO. PVC 00117X 0800HA is a Schedule 40 PVC adapter bushing designed for sewer and drain piping systems. It connects a 4-inch sewer and drain spigot end to a 3-inch DWV hub, allowing a reduction in line size within a gravity-drain assembly. The bushing is manufactured to Schedule 40 wall thickness standards, making it suitable for below-grade and above-grade DWV applications. Licensed plumbers and drain installers use this fitting when transitioning between pipe sizes in residential and light commercial waste systems. This SKU ships in a package of 20 units.

This adapter bushing is used in Schedule 40 PVC sewer and drain systems where a 4-inch main line must step down to a 3-inch branch or continuation. Typical installations include residential drain stacks, building sewers, and commercial DWV rough-in work. The spigot-to-hub configuration allows the bushing to be solvent-welded directly into an existing 3-inch DWV hub fitting while accepting a 4-inch spigot pipe or fitting on the inlet side.

Key Features

• Reduces a 4-inch sewer and drain spigot to a 3-inch DWV hub in a single fitting
• Schedule 40 PVC construction meets standard DWV wall thickness requirements
• Solvent-weld connection on both ends for a permanent, leak-resistant joint
• Sold in a package of 20 units, suitable for stocking or multi-fixture jobs
• Suitable for above-grade and below-grade non-pressure drain, waste, and vent applications

Compatibility

Designed as an OEM-style replacement and standard fitting for Schedule 40 PVC sewer and drain DWV piping systems requiring a 4-inch spigot to 3-inch hub reduction.

Installation Notes

Installation should be performed by a licensed plumber in accordance with local plumbing codes and the International Plumbing Code (IPC). Shut off any upstream flow and ensure the pipe ends are clean, dry, and deburred before applying solvent cement. Use a PVC primer and solvent cement rated for Schedule 40 DWV applications, and allow adequate cure time before restoring flow. Do not use this fitting in pressurized water supply lines.