Charlotte Pipe Foundry Co. Pvc 00706X 1200HA 4 in Sch 40 Pvc P-trap

Product Description

The Charlotte Pipe Foundry Co. PVC 00706X 1200HA is a 4-inch Schedule 40 PVC P-trap designed for drain, waste, and vent (DWV) applications. The P-trap maintains a water seal that blocks sewer gases from entering occupied spaces, a fundamental requirement in any properly installed drainage system. Built from Schedule 40 PVC, the fitting delivers the wall thickness and pressure rating required for residential and light commercial DWV work. Licensed plumbers and pipefitters are the typical installers for this type of fitting.

This P-trap is suited for floor or wall drain installations where a 4-inch nominal pipe size is required. Common applications include floor drain connections, laundry standpipe configurations, commercial sink and floor sink assemblies, and similar gravity-flow waste systems. The 4-inch size is frequently specified in commercial kitchens, laundry rooms, and utility spaces where higher flow volumes are anticipated. The fitting is sold in a package quantity of 4 units per order.

Key Features

• Schedule 40 PVC wall thickness rated for standard DWV service
• 4-inch nominal size accommodates higher-volume waste and drain lines
• P-trap configuration provides required water seal against sewer gas intrusion
• PVC construction resists corrosion and common drain-line chemicals
• Package quantity of 4 units supports multi-fixture or multi-unit installations

Compatibility

Designed as an OEM-style replacement and new-installation fitting for 4-inch Schedule 40 PVC DWV piping systems.

Installation Notes

Installation should be performed by a licensed plumber in accordance with the International Plumbing Code (IPC) and applicable local amendments. Shut off the water supply and ensure the drain line is depressurized before beginning work. Solvent-cement joining is the standard connection method for Schedule 40 PVC DWV fittings; use a PVC-rated primer and cement approved for the pipe schedule and service type. Confirm trap arm slope and seal depth meet local code minimums before closing the wall or floor assembly.