Centaur 70014 TG100 PG100 Standard Single Angle Collet 19/64

Product Description

The CENTAUR 70014 is a standard single angle collet designed for TG100 and PG100 tooling systems used in precision machining operations. It accepts a 0.2969-inch (19/64) bore and delivers a total indicator runout (TIR) of 0.0005 inches, making it suitable for applications where concentricity and repeatability are critical. With an overall length of 2.38 inches and a body diameter of 1.38 inches, the 70014 fits standard TG/PG 100 collet chucks and is installed by machinists and tooling technicians in CNC and manual machine tool setups.

This collet is used in milling, drilling, tapping, and reaming operations where TG100 or PG100 collet chucks are the specified workholding method. It is suited for both production and job-shop environments running light to medium cutting loads. The 19/64 bore size accommodates round shanks at that nominal diameter. This is a single-unit item with no minimum order quantity above one piece, making it practical for replacement or tooling buildout purchases.

Key Features

• 0.0005-inch TIR for consistent concentricity in precision cutting applications
• Compatible with TG100 and PG100 collet chuck systems
• 0.2969-inch (19/64) bore diameter for standard round shank tooling
• 1.38-inch maximum body diameter fits standard TG/PG 100 chuck bores
• 2.38-inch overall length provides adequate tool projection control

Compatibility

Designed for use with TG100 and PG100 series collet chucks accepting standard single angle collets with a 1.38-inch body diameter.

Installation Notes

Installation is performed by a machinist or toolroom technician. The machine spindle must be powered down and the chuck assembly fully de-energized or disengaged before collet installation or removal. Use a proper TG100 or PG100 collet nut and spanner wrench rated for the chuck; do not use pipe wrenches or improvised tools that could damage the collet taper or chuck bore. Verify runout with a dial indicator after seating the collet to confirm the 0.0005-inch TIR specification is met before beginning a cut.