Carpenter Paterson 100-4 4 Inch Black Clevis Hanger

Product Description

The CARPENTER PATERSON 100-4 is a rod-mount clevis hanger designed to support non-insulated, stationary pipe lines from above in commercial and industrial piping systems. Fabricated from carbon steel with a black finish, it carries a load rating of 1430 pounds and a temperature rating of 650 degrees F. The hanger provides approximately 1 inch to 1.5 inches of vertical adjustment after the pipe is in place. A lower nut (not furnished) sets the pipe line to the proper elevation, while a top nut (not furnished) must be tightened securely to prevent loosening from vibration. Plumbers, pipefitters, and mechanical contractors install this fitting as part of overhead pipe support systems.

This clevis hanger is suited for 4-inch pipe in commercial, industrial, pharmaceutical, petrochemical, and hospital piping systems. It mounts via a 5/8-inch diameter rod and is built to meet the demands of high-load, stationary overhead pipe runs where vertical fine-tuning after installation is required. The 4-3/8-inch rod take-out dimension and 5-3/8-inch centerline distance are sized for standard 4-inch pipe applications in mechanical rooms, process facilities, and healthcare infrastructure.

Key Features

• Supports 4-inch non-insulated, stationary pipe lines from above
• 1430-pound load rating for heavy-duty commercial and industrial service
• Temperature rated to 650 degrees F
• Approximately 1 inch to 1.5 inches of vertical adjustment after pipe placement
• 5/8-inch diameter rod mount with 4-3/8-inch rod take-out dimension
• Carbon steel construction with black finish for durability

Compatibility

Designed for use with 4-inch non-insulated stationary pipe lines in commercial, industrial, pharmaceutical, petrochemical, and hospital applications. Meets ASME B31.1, AA-1192A Type 1, ANSI/MSS SP-58/SP-69 Type 1, BSPSS-BS3974, UL, WW-H-171E Type 1, and FM standards.

Installation Notes

Installation is typically performed by licensed pipefitters or plumbers in accordance with applicable mechanical codes. Shut down and depressurize the pipe system before installing or adjusting the hanger. The lower nut (not furnished) must be used to achieve correct pipe elevation; the top nut (not furnished) must be tightened securely against the hanger to prevent vibration-induced loosening. Do not use this hanger to support insulated or moving pipe lines.

Technical Specifications

• Load Rating: 1430 pounds
• Temperature Rating: 650 degrees F
• Pipe Size: 4 inches
• Hanger Mounting Rod Diameter: 0.625 inches
• Centerline Distance: 5.375 inches
• Rod Take-Out Dimension: 4.375 inches
• Material: Carbon Steel
• Finish: Black
• Type: Clevis, Rod Mount
• Application: Commercial, Industrial, Pharmaceutical, Petrochemical, Hospital
• Weight: 1.4 pounds
• Applicable Standards: ASME B31.1, AA-1192A Type 1, ANSI/MSS SP-58/SP-69 Type 1, BSPSS-BS3974, UL, WW-H-171E Type 1, FM
• Warranty: 1 Year Limited

Standard Information

• Brand: CARPENTER PATERSON
• Manufacturer Part Number: 100-4