Camden Door Controls CM-4085G/7 Green Spring Return Dpst Push Button

Product Description

The Camden Door Controls CM-4085G/7 is a green momentary push button switch with spring return action and a DPST (double-pole, single-throw) configuration, featuring an adjustable timer range of 1 to 60 seconds. It is designed for use in access control and door release applications where a timed electrical signal is required to actuate a locking or door-opening mechanism. Licensed electricians and low-voltage access control technicians are the primary installers. The spring return mechanism ensures the button automatically resets to the off position after each press, providing reliable, repeatable operation in high-traffic entry and exit points.

This push button is suited for commercial and institutional access control installations, including office buildings, healthcare facilities, schools, and secured entry vestibules. It serves as an exit device push button, commonly mounted near door frames or on adjacent walls to trigger electric strikes, magnetic locks, or door operators. The adjustable 1 to 60 second timer allows the installer to tailor the output signal duration to match the door hardware and access control panel requirements without additional relay modules.

Key Features

• Green momentary button with spring return action for automatic reset after each press
• DPST switching configuration supports versatile wiring in access control circuits
• Adjustable timer range of 1 to 60 seconds built in, eliminating the need for a separate timer relay
• Designed for exit device and door release applications in commercial installations
• Sold as individual unit for single-point replacement or new installation

Compatibility

Designed as an OEM-style replacement or new-installation push button for commercial access control systems requiring a timed DPST momentary switch output, including exit device and door release circuits.

Installation Notes

Installation is typically performed by a licensed electrician or a qualified low-voltage access control technician. De-energize all associated door hardware circuits and access control panels before wiring or replacing this device. Mounting and wiring should comply with applicable NEC requirements for low-voltage control wiring and local building codes governing access control and egress hardware. Do not bypass or defeat any life-safety egress requirements when integrating this button into a door release circuit.