Camden Door Controls CM-4050R/8 Push Pull Switch No Nc Red

Product Description

The Camden Door Controls CM-4050R/8 is a push/pull momentary switch with both normally open (N/O) and normally closed (N/C) contact configurations, finished with a main red actuator button. Designed for access control and door release applications, this switch provides the switching action needed to trigger electric strikes, magnetic locks, or other low-voltage door hardware. It is installed by electricians and access control technicians in commercial and institutional settings where a clearly visible, tactile exit or entry control point is required.

This switch is suited for commercial door control installations where a surface-mounted push or pull actuator is needed at an entry or egress point. The red button face makes it visually distinct for applications such as emergency egress release, door activation stations, or access control entry points in office buildings, healthcare facilities, schools, and similar environments. It ships as a single unit and is typically wired into a low-voltage access control panel or door release circuit.

Key Features

• Push and pull actuator operation in a single device
• Dual contact output: normally open (N/O) and normally closed (N/C)
• Main red button face for high-visibility identification at the door station
• Designed for low-voltage access control and door release wiring
• Single unit packaging for straightforward replacement or new installation

Compatibility

Designed as an OEM-style replacement or new-installation switch for commercial access control door stations requiring a push/pull momentary actuator with N/O and N/C contacts.

Installation Notes

Installation should be performed by a licensed electrician or qualified access control technician. Disconnect and de-energize the door control circuit before wiring or replacing this switch. Follow applicable local electrical codes and the door hardware manufacturer wiring diagrams when terminating N/O and N/C contacts to the control panel. Verify correct contact configuration is selected at the panel before restoring power and testing door operation.