Camden Door Controls CM-1130-60KA Key Switch Spst

Product Description

The Camden Door Controls CM-1130-60KA is a single-pole single-throw (SPST) maintained-contact key switch designed for access control and door operator applications. It uses a single mortise cylinder format, meaning the lock cylinder mounts flush into a standard mortise cutout in a wall plate or enclosure. When the key is turned, the switch holds its position until the key is turned back, making it well suited for latching on/off control of door operators, electric strikes, or access control circuits. Licensed electricians and low-voltage technicians are the primary installers for this type of device.

This key switch is used in commercial and light-industrial access control installations where a keyed, tamper-resistant activation point is required. Typical applications include controlling automatic door operators, gate operators, or other access-controlled entry points where a maintained switching action is needed. The mortise cylinder configuration allows installation in standard single-gang wall boxes or custom enclosures.

Key Features

• SPST maintained-contact switching action holds the circuit state after key actuation
• Single mortise cylinder format fits standard mortise cutouts in wall plates and enclosures
• Keyed operation provides tamper-resistant, controlled access to the switching function
• Compact form factor suitable for single-gang wall box or custom panel installation
• Sold as an individual unit for single-point installations

Compatibility

Designed as an OEM-style key switch for commercial access control and door operator systems requiring a maintained SPST switching function with a mortise cylinder format.

Installation Notes

Installation should be performed by a licensed electrician or qualified low-voltage technician in accordance with applicable NEC requirements. Disconnect and de-energize all connected circuits before installing or servicing this switch. Verify that the mortise cutout dimensions in the mounting surface match the cylinder body before installation. Do not apply voltage exceeding the switch rating to the circuit contacts.