C2G CG41045 Hdmi Decora Passthrough Wall Plate Black

Product Description

The C2G Cables To Go Legrand CG41045 is an HDMI Decora-style passthrough wall plate designed for clean, permanent HDMI signal routing in residential and commercial AV installations. The passthrough design accepts a standard HDMI cable on each side, allowing technicians to route high-definition video and audio signals through a wall without cutting or terminating cable ends. It fits standard single-gang Decora wall boxes and installs flush for a finished appearance. The black faceplate blends with common switch and outlet configurations. This is a passive, no-power component intended for structured wiring and low-voltage AV rough-in work.

This wall plate is used in home theater builds, conference room AV setups, classroom display installations, and any application where a source device needs a wall-mounted HDMI connection point. Installers route an HDMI cable from a source or wall-mounted display through the wall cavity and connect it on the back side of the plate. The front port provides a clean, accessible connection point for a second HDMI cable running to the display or source device. It is suited for both new construction and retrofit low-voltage installations.

Key Features

• Decora single-gang form factor fits standard low-voltage wall boxes
• Passthrough design preserves full HDMI cable without termination or signal conversion
• Black faceplate finish coordinates with standard Decora-style devices
• Passive component requires no power source or external equipment
• Sold as a single unit, quantity one per package

Compatibility

Designed as an OEM-style passthrough solution for standard single-gang Decora wall boxes used in residential and commercial low-voltage HDMI cable routing installations.

Installation Notes

Installation should be performed by a qualified low-voltage technician or licensed electrician in accordance with NEC Article 725 and local low-voltage wiring codes. Ensure the wall box is properly secured and any adjacent high-voltage circuits are powered down before beginning work. Route HDMI cables through the wall cavity with adequate slack on both sides before seating the plate. Do not force HDMI connectors into the passthrough ports; verify connector orientation before inserting.